Caliber RMD574BT Owner's Manual download pdf (Page 11)

Other Operations

1. AV Input

The AV Input is a set of composite input on the rear of the unit. Press the Mode button to choose AUX. Connect any portable audio/

video device such as a DVD player or VCD player to unit. Use the volume control to adjust volume.

2. Aux Input

The Aux Input Jack is a 3.5mm connector on the front panel of the unit. Press the Mode button to choose AUX. Connect any portable

audio device such as a discman or a portable MP3 player to the unit. Use the volume control to adjust volume.

3. Backup Camera Input

The backup camera input is on the back of the unit. (refer to wiring diagram). This input (in yellow) is for connecting backup camera for

parking. You must connect the VCC wire (in pink color) to the reverse gear switch in order to activate this video input mode when you

switch the reverse gear of your car. Please refer to the wiring diagram for more details.

4. Video Output x 1

The Video Output Jack is on the back of the unit. (Refer to Wiring Diagram) This output (in yellow) is for connecting monitor(s). You must

connect a monitor for car in order to play this unit in another monitor. Consult your dealer for any kinds of monitors that are suitable to

use in car.

5. RCA Output x 2 sets

The RCA Output Jack is on the back of the unit. (Refer to Wiring Diagram) This output is for connecting amplifier, equalizer, or other

audio component that requires a pre-amp out connection. (Red=Right, White=Left)

Follow the manufactures instructions for the audio

component that you are connecting.

6. Subwoofer Output x 1

The Subwoofer Output Jack is on the output wire harness. (Refer to Wiring Diagram) This output is for connecting up to 2 subwoofer

amplifier to the Subwoofer Output Jack to drive a subwoofer. Follow the amplifier’s installation instructions.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Caliber RMD574BT Owner's Manual Page 11