Caliber MCD263BT Instruction Manual download pdf (Page 10)

2. When the call ends

RESET

RESET

RESET

Hang up the phone.

'TEL CALL' disappears from the display.

The original source (i.e. the one used

before the phone call) is returned to

automatically and the volume restored

gradually.

button must be activated with either

a ballpoint pen or thin metal object. The

buttonistobeactivatedforthe

following reasons:

- Initial installation of the unit when all

wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

Note:

if you press button, the unit can't

work yet, please use a cotton swab soaked

in isopropyl alcohol to clean the socket on

the front panel.

Reset function

Radio Operations

SWITCHING TO RADIO MODE

SELECTING THE FREQUENCY BAND

SELECTING STATION

AUTOMATIC MEMORY STORING &

PROGRAM SCANNING

STATION STORING

Press button to select radio mode,

the radio mode appears on the LCD display

together with the memory band and

frequency.

Press button to select the desired

band. The reception band will change

between FM1 FM2 FM3.

Press the button for 2 seconds, the

radio searches from the current frequency

and checks the signal strength until one

cycle search is finished. And then 6

strongest stations are stored into the

corresponding preset number button.

Press the button shortly to scan

preset station. When the field strength level

is more than the threshold level of stop

level, the radio is holding at that preset

number for several seconds with release

mute, and then searches again.

MODE

BND

- Automatic memory storing

AS/PS

- Program scanning

AS/PS

,,

- Press preset button to select a station

which had been stored in the memory.

- Press the button for 2 seconds until

“MANUAL” appears on the display, and

then press the button to select a

station. If both buttons have not been

pressed for several seconds, they will

return to automatic seek mode .

-Pressthe buttontoactivate

automatic seek mode.

- In manual mode, press the button to

select a station.

Press the preset button for 2 seconds to

store current station into the number button.

1-6

1-6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Comments to this Manuals

No comments